Type Body Drop Center T45-89mm T60-102mm Button Bit For Mining
T thread top hammer drilling bits are designed for extended wear life. In addition to this, you benefit from great versitality, higher penetration rates, straighter holes and longer bit life.
T threaded botton bits is from 28-152 mm in diameter, are made from cemented carbide throughout. We provides all the most efficient button shapes (spherical, ballistic and conical) and the required skirt designs (regular or retrac) in order to obtain the best bit for the rock formation in question.
In addition to the choice of tunsten carbide button grade, how to choose the drill bit design is very important for the drilling work efficiency, also it will have a direct impact on the hole effect & vertical degree. Combined with our production and sales experience, we have summarized some of the following lessons for reference only:
Spherical buttons: The height of exposed teeth is low, mainly used in the very hard rock formation above F14, to improve wear resistance, to prevent the situation of debris, it should take lower drilling speed.
Ballistic buttons: It can expose more height of buttons, mainly used in soft rock and ordinary rock below F12, with quicker drilling speed, but encountered hard rock, very easily to happen buttons debris phenomenon.
Technical Data
| R38 T38 T45 T51,T60,T60Thread Button Bit |
Diameter
(mm) | No. of buttons | Buttons x button diameter
(Gauge, Centre) | Buttons angle °
(Gauge, Front) | Flushing hole
(Side, Centre) | Weight approx (kg) |
| 70 | 12 | 8x11, 4x11 | 40 | -, 2 | 2.2 |
| 70 | 11 | 6x12.7, 5x10 | 35 | 1, 2 | 2.2 |
| 70 | 10 | 6x11, 3x11,1x9 | 35 | -, 3 | 2 |
| 70 | 10 | 6x11, 3x11,1x9 | 35 | -, 3 | 2.1 |
| 76 | 12 | 8x11, 4x11 | 40 | -, 2 | 2.2 |
| 76 | 12 | 8x11, 4x11 | 40 | -, 2 | 2.8 |
| 76 | 11 | 6x12.7, 5x11 | 35 | 2, 1 | 2.6 |
| 76 | 13 | 8x12.7, 5x11 | 35 | 1, 2 | 2.4 |
| 76 | 13 | 8x12.7, 5x11 | 35 | 1, 2 | 2.7 |
| 76 | 10 | 6x12.7, 3x11,1x11 | 35 | 1, 2 | 2.6 |
| 76 | 13 | 8x11, 4x11,1x11 | 35 | 1, 4 | 3.2 |
| 76 | 13 | 8x12.7, 4x11,1x11 | 35 | -, 4 | 2.4 |
| 76 | 13 | 8x12.7, 4x11,1x11 | 35 | -, 4 | 3 |
| 89 | 12 | 8x12.7, 4x12.7 | 40 | -, 2 | 3.3 |
| 89 | 14 | 8x12.7, 6x11 | 35 | 1, 1 | 3.7 |
| 89 | 12 | 8x12.7, 4x12.7 | 40 | -, 2 | 5 |
| 89 | 14 | 8x12.7, 6x12.7 | 35 | 1, 2 | 4.7 |
| 89 | 11 | 6x12.7, 3x11,2x11 | 35 | 1, 3 | 3.5 |
| 89 | 14 | 8x11, 4x11,2x9 | 35 | 1, 4 | 4.7 |
| 89 | 13 | 8x12.7, 4x11,1x11 | 35 | -, 4 | 3 |
| 89 | 13 | 8x12.7, 4x11,1x11 | 35 | -, 4 | 4.2 |
| 102 | 12 | 8x14.5, 4x14.5 | 40 | -, 2 | 4.4 |
| 102 | 12 | 8x14.5, 4x14.5 | 40 | -, 2 | 6.7 |
| 102 | 14 | 8x15.8, 6x12.7 | 35 | 1, 2 | 3.7 |
| 102 | 11 | 6x14.5, 3x12.7,2x12.7 | 35 | 1, 3 | 3.9 |
| 102 | 14 | 8x12.7, 4x12.7,2x12.7 | 35 | 1, 4 | 6.9 |
| 102 | 13 | 8x14.5, 4x12.7,1x12.7 | 35 | -, 4 | 5.3 |
| 115 | 18 | 10x12.7, 8x12.7 | 35 | -, 2 | 5.4 |
| 115 | 14 | 8x14.5, 4x12.7,2x12,7 | 35 | 1, 4 | 5 |
| 127 | 19 | 18x12.7, 1x12.7 | 35 | 1, 3 | 5.3 |
| 152 | 20 | 18x14.5, 2x14.5 | 35 | 1, 3 | 9.9 |
MIROC® Production:
Integral Rods
Plug Hole Rods
Tapered Drilling Tools
Extension Drilling Tools
Drifting and Tunneling Tools
Reaming Tools
Shank Rods
Coupling Sleeves
Shank Adapters (Striking Bars)
Down-the-hole (DTH) Bits
Down-the-hole (DTH) Hammers
Product Tags:
|
|
Type Body Drop Center T45-89mm T60-102mm Button Bit For Mining Images
|
